05-21-2012, 03:51 AM
1/16" is going to be far too small...the hobby store usually sells 3/32" rod which is a bit smaller than 1/8"...I have some at home. Were you planning on finishing the belt before Castra Aestiva Jay? If not, I can bring you some then.
It looks to me though that the hole could also easily be 1/8", depending on the disc size. But if you are using 1" discs then a 1/8" brass rod would be fine.
As to the soldering and centering...not really. All you have to do is clamp the rivet with pliers to the disc and then it doesn't move when you solder it.
It looks to me though that the hole could also easily be 1/8", depending on the disc size. But if you are using 1" discs then a 1/8" brass rod would be fine.
As to the soldering and centering...not really. All you have to do is clamp the rivet with pliers to the disc and then it doesn't move when you solder it.
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
