Posts: 1,470
Threads: 253
Joined: Sep 2007
Reputation:
3
Here are the results of my trip to the Goodwill store today - total cost
less than 20.00
2 each straw hats
1 Copper bowl (I may replace the handles)
1 Bronze trivit/ cook stand
1 Small Eagle (I may make this into a mini standard for the little grandkids)
Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
Ha! Nice finds...I think that could beat Matt Amt going through trash piles lol.
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 208
Threads: 14
Joined: Jun 2008
Reputation:
0
Hey John,
Good haul. I like the copper bowl. Oh also thanks for the info about places to get my gear. I have bought everything I needed already. Almost 2 grand. Being in Iraq helps with the funds. :lol:
Bryan
Tiberius Antonius Festus
Bryan Fitch
The Roman Army is on the march trough Texas! :twisted: <img src="{SMILIES_PATH}/icon_twisted.gif" alt=":twisted:" title="Twisted Evil" />:twisted:
Posts: 4,318
Threads: 127
Joined: Jan 2004
Reputation:
6
Posts: 4,887
Threads: 163
Joined: Aug 2002
Reputation:
0
Don't forget to tin the inside of the pot if you intend to use it for cooking. :wink:
Posts: 2,253
Threads: 31
Joined: Jan 2001
Reputation:
0
Did you go through the aisle with bedding and tablecloths? You can find linen tablecloths (pink and other colors can be used for shield coverings, and painted over) and wool blankets (cloaks, etc.). Brass candlesticks with the tall plain shaft--unscrew the top and bottom (NOT in the store, silly, BUY it first!) and melt them down for buckles, while the shaft is a nice piece of 1/4" round rod (crest supports, etc.).
Sometimes there are good videos, too!
Happy shopping!
Matthew
PS: Hey, don't diss them dumpsters, dude...
Matthew Amt (Quintus)
Legio XX, USA
<a class="postlink" href="http://www.larp.com/legioxx/">http://www.larp.com/legioxx/
Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
LOL
hey, you can use round rod for crest mounts?
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 2,253
Threads: 31
Joined: Jan 2001
Reputation:
0
Quote:hey, you can use round rod for crest mounts?
Well, you have to grind them square, first, but it doesn't take long. Actuallly, the first piece of round rod that I made my own crest support from was something I found lying in the gutter. Must have been some sort of brazing rod, since I was able to bend it very nicely while red-hot. I didn't know any better! Naturally when I tried to bend a piece of hot regular brass the next time, it broke! So I thought, "No problem, it's still long enough, I can start again at the other end." And broke it again! Grrrr..... Now I know better. Never work hot brass!
Matthew
Matthew Amt (Quintus)
Legio XX, USA
<a class="postlink" href="http://www.larp.com/legioxx/">http://www.larp.com/legioxx/
Posts: 3,817
Threads: 147
Joined: Dec 2001
Reputation:
2
Yeah well, that happened to me with the latest one I was making out of mild steel...had it red hot and it still snapped. Guess I needed to re-heat it.
Oh, and I broke both ends...lol.
____________________________________________________________
Magnus/Matt
Du Courage Viens La Verité
Legion: TBD
Posts: 13,279
Threads: 102
Joined: May 2006
Reputation:
3
Hmmm, that sounds fishy......sure it was steel? :?
Visne partem mei capere? Comminus agamus! * Me semper rogo, Quid faceret Iulius Caesar? * Confidence is a good thing! Overconfidence is too much of a good thing.
[b]Legio XIIII GMV. (Q. Magivs)RMRS Remember Atuatuca! Vengence will be ours!
Titus Flavius Germanus
Batavian Coh I
Byron Angel
Posts: 79
Threads: 15
Joined: Sep 2007
Reputation:
0
Quote:Magnus:2m5rtj7h Wrote:hey, you can use round rod for crest mounts?
Well, you have to grind them square, first, but it doesn't take long. Actuallly, the first piece of round rod that I made my own crest support from was something I found lying in the gutter. Must have been some sort of brazing rod, since I was able to bend it very nicely while red-hot. I didn't know any better! Naturally when I tried to bend a piece of hot regular brass the next time, it broke! So I thought, "No problem, it's still long enough, I can start again at the other end." And broke it again! Grrrr..... Now I know better. Never work hot brass!
Matthew
Yup. NEVER work brass hot. You have to work it cold after it's been annealed. Just heat it to a nice cherry heat and then plunge it into cold water. All copper alloys anneal this way, ferric metals anneal by heating them and allowing them to cool very slowly (the slower the better).
And NEVER use something you "found in a gutter", you don't know where it's been!
:lol:
Titus Petronicus Graccus
Cohors I Vindelicorvm
Pedro Bedard
Posts: 305
Threads: 17
Joined: Jul 2007
Reputation:
0
Gotta love Goodwill. I found a glass flask and jug that I use for honey and olive oil, several bowls and cups there that I use in my marching pack. I keep looking for an appropriate blanket to make a paenula out of, but no luck yet. And there's all kinds of brass there.
---AH Mervla, aka Joel Boynton
Legio XIIII, Gemina Martia Victrix
|