12-31-2014, 10:30 AM
As Cesar has pointed out that is indeed not a phalera but here is a picture that shows the Lauersfort Phalerae, with also a picture of the reverse that shows three rings to hold the pieces onto the leather harness.
The rings went through slots in the leather and were held by split pins here is a picture of one of a set of the Lauersfort that I am currently making, it shows how I have fitted the plates with holes for split pins.
The metal at the edge of the disc is the very thin metal of the phalera that is hand made as were the originals.
[attachment=11407]Bs-GKQBGkKGrHqQH-CoEvEWnjeLFBL6BozdDQ_1.jpg[/attachment]
[attachment=11408]Picture155.jpg[/attachment]
The rings went through slots in the leather and were held by split pins here is a picture of one of a set of the Lauersfort that I am currently making, it shows how I have fitted the plates with holes for split pins.
The metal at the edge of the disc is the very thin metal of the phalera that is hand made as were the originals.
[attachment=11407]Bs-GKQBGkKGrHqQH-CoEvEWnjeLFBL6BozdDQ_1.jpg[/attachment]
[attachment=11408]Picture155.jpg[/attachment]
Brian Stobbs
