+- RomanArmyTalk (https://www.romanarmytalk.com/rat)
+-- Forum: Reenactment (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=5)
+--- Forum: Roman Re-Enactment & Reconstruction (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=26)
+--- Thread: Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl (/showthread.php?tid=5367)
Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - Matt Lukes - 04-11-2006
Avete omnes,
Normally I would restrict my offerings to the Marketplace, but I know just how much of a pain it can be to make good segmentata lobate hinges let alone find them for sale anywhere, so now that I can provide them cheaply, I figured I should let you all know.
They're die-cut, the die made to replicate an original hinge in my collection almost exactly- including the slight assymetry so they don't look industrially-manufactured :wink:
I can provide both complete hinges and just folded blanks. Complete hinges will have holes drilled in them and even the circular embossed decoration around the holes if desired. Blanks will not have holes or hinge slots cut.
A full set of 8 complete hinges ready to mount will be $80USD, and a full set of 16 blanks will be $20USD.
I do all the work right here, so can provide the blanks immediatley on order- no lag-time, and only 1-2 days for complete hinges.
At present I only have 0.015" (0.38mm) sheet brass with which to make the hinges (I've always found it sufficently strong), however if anyone wants thicker ones (0.020", for example), I'll need an initial order of at least $150 to justify buying the metal.
Valete
Matt
since I\'m a complete klutz - richsc - 04-12-2006
Sounds good to me. I mangle every hinge I touch.
Re: Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - Chuck Russell - 04-12-2006
super cool
Re: Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - Robert Vermaat - 04-12-2006
Hi Matt,
Great stuff. What's the original?
Re: Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - Matt Lukes - 04-12-2006
The original hinge is one I acquired from a dealer in Europe- it comes from the Balkans. Interestingly, the two halves appear to be virtually identical including the 'odd' shaped areas, suggesting to me that it might have actually been made with a cutting-die or shaped chisel. There's a fair amount of work involved in making halves even close in shape by hand, let alone so similar.
The other really great thing about this hinge is that the damage actually allows more information to be gleaned from it than if it were perfect; for example, I can tell that the hinge pin is almost exactly 3/16" in diameter (4.75mm), so I know the 3/16" brass rod I use is absolutely correct. Since some of the rivets are missing, I can tell that their shank size was just about 7/64" (2.75mm), so #10 solid copper wire is perfect for authentic rivets. Also since the iron plate to which this hinge was riveted is now gone, the peened shanks of the rivets show that the 18-gauge steel we all use for plates is indeed an accurate choice.
Re: Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - Tarbicus - 04-12-2006
Quote:the peened shanks of the rivets show that the 18-gauge steel we all use for plates is indeed an accurate choice.For shoulder guards :wink:
Re: Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - Matt Lukes - 04-12-2006
Quite so- and collar/ upper back/ breastplates too- all the parts the lobate hinges attached to. They don't say anything about the girth hoops or lesser shoulder guards
Re: Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - Martin Moser - 04-13-2006
Very good work again, Matt!
I know how much work is involved in making those by hand (having made quite a few sets myself), so I can assure anybody interested in buying those that by the looks of it you are getting good quality for a good price here!
Inexpensive Die-Cut Lorica segmentata Lobate Hinges availabl - mjursic - 08-23-2015
I get that it's 9 years later, but are your hinges still available? I need a complete set of blanks if you got em. Please email me, mjursic a t gm ail do t com. Thanks