08-21-2002, 03:21 AM
Check at your local hobby shop, sometimes they have all kinds of steel rod that is very small. You could hammer this, but hammer it on both sides, perhaps this would create an evenly angled point. Or, you could flatten it out, then sand it using a dremel or some sand paper to the shape/angle you desire. <p>"Only Trajan could go to Dacia."<BR>
<BR>
Magnus/Matt<BR>
Optio<BR>
Legio XXX "Ulpia Victrix" </p><i></i>
<BR>
Magnus/Matt<BR>
Optio<BR>
Legio XXX "Ulpia Victrix" </p><i></i>
