Building a seg: width of gridle plates and overlap

[Anonymous]

Then we're back to eight plates. I would say that if the Indian torso assembly fit you fine for the length, I would just use the same width and overlap and just re-adjust the shape and length of the individual plates to better fit your torso, perhaps with a bit more cutout on those top plates that are digging into the underside of your arm. If the Indian assembly is a little long or short figure how much either way and divide the difference by eight to see how much you need to add or take away from each plate. Don't drive yourself crazy with this, if you screw up the metal I have plenty more. I head up your way 2 or 3 times a month and can drop more off if you need it. <p></p><i></i>