Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My new scutum and its cover
#1
See it at:<br>
<br>
66.66.186.34/roman/scutum.html<br>
<br>
On the scutum I used a rawhide edge. My attempt at doing an edge in brass was pretty bad. I have to thank Matt of Legio XXX for the shield pattern stencils.<br>
<br>
The cover is made from goat skin. This is my first experience with using goat leather, it's softer than cow leather. Four hides was barely enough to do the complete cover. After oiling the cover went on fine using just the drawstring. An additional thong or belt does not appear to be necessary. On the corners I simply trimmed the leather back a bit. I tried stitching the drawstring all the way across the corners, but after wards the cover did not stay on the shield as well.<br>
<br>
My next project is going to be a satchel. I'm reading the article on the reconstruction of the Bar Hill satchel (JRMES Vol. 2). I gather that it wasn't clear to the authors of that paper whether the Bar Hill satchel was made from either cow or goat leather. <p></p><i></i>
Reply
#2
I have made several reconstructions of the satchel, only one of which was cow leather the remainder were of goat.<br>
<br>
Goat leather is very much easier to work with and one large goatskin is just big enough to make the satchel in one piece. It is also a rather convenient shape. However, I am not sure how big a Roman goat would have been nor exactly the right size for the satchel. I have always made mine 18 by 12 inches.<br>
<br>
Also, Goat leather is thin, which might suggest why all those reinforcing straps are needed (assuming that is what they are).<br>
<br>
That is quite a bit of supposition, but I vote goat. <p></p><i></i>
Reply
#3
We use the Latin term "loculus" to name the soldier's satchel.<br>
<br>
The term "sarcina" is the name for the entire kit bundle..... furca, loculus, tools, weapons..<br>
<br>
We've made about 2 dozen loculii so far.<br>
Below are some links to photos of some of the variations... there are others but we've not posted them yet. Some of the guys have the Bar Hill version.<br>
<br>
Some have internal ties, very useful when you cram your loculus full of everything you want to keep out of the weather.<br>
<br>
We also use almond oil to water resist them. Works very well.<br>
<br>
We prefer the goatskin. Ours are north African vegetable tanned goat hides. Kinda hard to find in the US. We were lucky. We have a standing order for several hundred more! ...for the papilio! Interestingly, one full goat hide is large enough for one loculus with a finished shape of 12"X 18". One full hide also about the correct size for a papilio panel as well...about 18"X24".... hmm... I've been told that in general modern goat is about the same size as ancient goat.<br>
<br>
We wax the seams prior to sewing... beeswax. We use waxed linen thread. We usually wax our own. Saves money. A glover's needle works exceptionally well with goatskin. All I need to push the needle through the leather is a leather thumb pad or a thimble.<br>
<br>
Pictures.....<br>
Goat:<br>
www.rlqm.com/1LoculusVer1front.jpg<br>
www.rlqm.com/1LoculusVer1back.jpg<br>
<br>
Bovine:<br>
Actually calfskin, 2-3oz weight<br>
www.rlqm.com/2LoculusVer2front.jpg<br>
www.rlqm.com/2LoculusVer2back.jpg<br>
Note the internal ties...<br>
www.rlqm.com/2LoculusVer2open.jpg<br>
<br>
Bovine<br>
www.rlqm.com/3LoculusVer3front.jpg<br>
Note the internal ties..<br>
www.rlqm.com/3LoculusVer3open.jpg<br>
<br>
Centurio's briefcase<br>
This version has gussets or side panels. Allows room for more gear. it's also made from a heavier bovine 4-5oz or 5-6oz. Much tougher to sew!<br>
www.legio-ix-hispana.org/...sfront.jpg<br>
www.legio-ix-hispana.org/...buckle.jpg<br>
<br>
Here are some photos from one of our monthly Campaing Marches.<br>
www.legio-ix-hispana.org/2003trek.html<br>
It rained most of the day... even the heavily oiled and or waxed seg's got the rust.<br>
<br>
Salvete....<br>
Gaius Valerius Tacitus Hibernicus, Centurio<br>
LEGIO IX HISPANA COH III EXPG CEN I HIB<br>
<br>
Vexillatio I: Los Angeles, Riverside, Orange, San Diego, Camp Pendelton<br>
Vexillatio II: Texas, Arizona, New Mexico, Colorado, Nebraska<br>
Vexillatio III: Washington, Okinawa , Northern California<br>
<br>
www.legio-ix-hispana.org<br>
<br>
619.563.5700 PST 9am- 8pm, most days<br>
<p></p><i></i>
Hibernicus

LEGIO IX HISPANA, USA

You cannot dig ditches in a toga!

[url:194jujcw]http://www.legio-ix-hispana.org[/url]
A nationwide club with chapters across N America
Reply
#4
I made my 12" x 18" sarcina / loculus from cow hide and you're right! It was hard to sew, especially when getting into the second to last corner. I used an awl throughout and being a gluton for punishment decided to backstitch the whole thing. I also put on all the reinforcing straps I knew of positions for (including the edges and centre of the flap). It took a long time, and given the strength of the leather I was using, probably didn't need any reinforcing straps. I was gratified to find, after I had finished, that the Legio XX site show a pattern which match the one I had used. It's one hell of a strong bag though! My other half decided she liked it and wanted one too. I made her one measuring 8" x 12" from sheep leather and added all of the same reinforcing straps, scaled down proportionally. Where my large satchel probably could have been strong enough without the strapping, her's is dependent on the strapping for its shape. Before I added most of the straps it collapsed into a fairly formless bag when anything of any weight was put into it. With the addition of the straps it holds its shape well. The sheep leather was also much easier to sew. Being that sheep and goats are very similar, how much difference is there between the leather of the two animals?<br>
<br>
Neuralmancer,<br>
<br>
Most of our shield covers are secured with drawstrings too. Some come undone very easily while others are a pain in the neck. I have often suspected that this was because of the type of cord used but it may be more to do with the type of leather used. I've not yet been able to examine enough of my comilites' shield covers to know.<br>
By the way - it looks to me as if your shield blazon is taken from the shield carried by the soldier said to be leading tethered prisoners shown on one of the column bases from Mainz. It has often struck me that this is essentially the same blazon as the one visible on the stele of Gnaeus Musius of Legio XIIII, also at Mainz. Has anyone else noticed this?<br>
<br>
Crispvs<br>
<p></p><i></i>
Who is called \'\'Paul\'\' by no-one other than his wife, parents and brothers.  :!: <img src="{SMILIES_PATH}/icon_exclaim.gif" alt=":!:" title="Exclamation" />:!:

<a class="postlink" href="http://www.romanarmy.net">www.romanarmy.net
Reply
#5
Well I guess I will not really know till I get to go on my first march with my goatskin covered scutum, but the cover seems to be secured quite well using just the drawstring. Though the overlap on the back is only about one and half inches, the corners of the cover are drawn tight. As I said, I simply cut back the corners of the cover. Attempting to stitch all the way around did not work. Maybe the goat leather is a bit more flexible than cow leather and that's why the romans used it for their shield covers.<br>
<br>
I'll have to ask Matt Lanteigne about the shield pattern. He picked it out and said "this is what we're going to use", and everyone in the legio went along. I think he took the pattern from Trajan's column. It looks good regardless.<br>
<br>
Nice pictures Hibernicus! You guys got it made in sunny California. Oh well, the up side of being in winter quarters is that I find time to work on projects. On your loculus, how did you make the studded central ring? The originals were bronze castings. <p></p><i></i>
Reply
#6
Neuralmancer,<br>
<br>
No criticism intended or I hope implied.<br>
<br>
Vale<br>
<br>
Crispvs <p></p><i></i>
Who is called \'\'Paul\'\' by no-one other than his wife, parents and brothers.  :!: <img src="{SMILIES_PATH}/icon_exclaim.gif" alt=":!:" title="Exclamation" />:!:

<a class="postlink" href="http://www.romanarmy.net">www.romanarmy.net
Reply
#7
Avete, omnes!<br>
<br>
Neuromancer asked:<br>
Quote:</em></strong><hr>On your loculus, how did you make the studded central ring? The originals were bronze castings. <hr><br>
<br>
The studded rings are those produced by Ray Mosely of Raymand's Quiet Press.<br>
<br>
Very nice castings, excellent prices.<br>
<br>
Scythius<br>
<br>
<p>LEG IX HSPA - COH III EXPG - CEN I HIB<br>
<br>
- FIDELITAS - - VIRTUS - - MAGNANIMITAS - </p><i></i>
Adam MacDonald

<a class="postlink" href="http://www.legio-ix-hispana.org">www.legio-ix-hispana.org
Reply
#8
Thanks Scythius! That solves that problem.<br>
<br>
Crispus, no offense assumed.<br>
<p></p><i></i>
Reply
#9
Can anyone yet tell me what the essential difference between sheep and goat leather is?<br>
<br>
Crispvs <p></p><i></i>
Who is called \'\'Paul\'\' by no-one other than his wife, parents and brothers.  :!: <img src="{SMILIES_PATH}/icon_exclaim.gif" alt=":!:" title="Exclamation" />:!:

<a class="postlink" href="http://www.romanarmy.net">www.romanarmy.net
Reply
#10
Most commercial goat and sheep leather has been thinned.<br>
Goat tends to be stronger.<br>
<br>
If you can find "natural goat" leather that hasn't been thinned you'll find it to be somewhat thicker than sheep. Some of the product we've found is 1/8" thick. This makes it lots easier to do blind stiches for a papilio or for a heel seam in a woman's shoe.<br>
<br>
Salvete<br>
Gaius Valerius Tacitus Hibernicus, Centurio<br>
LEGIO IX HISPANA COH III EXPG CEN I HIB<br>
<br>
Vexillatio I: Los Angeles, Riverside, Orange, San Diego, Camp Pendelton<br>
Vexillatio II: Texas, Arizona, New Mexico, Colorado, Nebraska<br>
Vexillatio III: Washington, Okinawa , Northern California<br>
<br>
www.legio-ix-hispana.org<br>
<br>
619.563.5700 PST 9am- 8pm, most days<br>
<br>
<br>
<p></p><i></i>
Hibernicus

LEGIO IX HISPANA, USA

You cannot dig ditches in a toga!

[url:194jujcw]http://www.legio-ix-hispana.org[/url]
A nationwide club with chapters across N America
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Legio V Scutum cover design jkaler48 8 3,511 08-03-2008, 11:29 AM
Last Post: caiusbeerquitius
  Scutum cover Titus Amatius Paulus 20 5,997 03-17-2006, 01:31 PM
Last Post: Neuraleanus

Forum Jump: