Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auxiliary shield cover??
#1
Hi everyone! And thanks for reading my very first post on RAT!
I'm working on my Roman marching gear and of course one of the items needed to complete this is a leather cover for my shield. But i can't find any leads on how one should look like for an oval auxiliary shield 1st centh period.

Can anyone help me on this one?

Best regards!

Richard.
Reply
#2
Try out this site

http://www.romanhideout.com/legiov/fabri...nta_en.asp

Hope it helps.
Titius Vedius Medullinus
Reply
#3
Thanks!
Reply
#4
As a basic guide, try this.

Firstly, get your hands on goat skins. To be on the safe side get four, as some may be smaller than others and you will not be able to use the entirety of each skin (leather merchants will often sell leather by the square foot but this footage will include part such as th legs which will not be useful to you in making a shield cover).

Secondly, decide whether or not you want to make a separate part to cover the shield boss.

Thirdly, the cover should be flat and slightly larger than the shield.

Fourthly, if you have decided to make a separate piece to cover the boss, cut a circular piece of goatskin slightly larger than the flange of the shield boss. You can give is a smooth edge or you can decide to cut small triangular dags into the leather , giving 'sharks tooth' edge to the boss cover. You will also need to stretch the leather to fit easily over the boss. To do this, saturate the leather and stretch it over something of the right shape. You could use a shot put or something similar or you could even use the boss on your shield (but be prepared to have to sand rust off it afterwards if you do. Leave the leather to dry thoroughly before you sew it on to the rest of he cover.

Fifthly, having decided how you want to arrange the goatskins to make a cover of the desired shape (preferably having first looked at pictures of surviving covers such as those from Valkenburg), sew them together using linen thread. If you have not sewn leather before, you will need to run your thread through a piece of beeswax to stop it fraying and separating as you sew with it. If you have decided to make a separate piece for the shield boss remember to leave a space in the middle of the cover to accommodate this piece. Sew the boss piece on once you have sewn the rest together so that it is on the outside.

Sixthly, when flat the cover should overlap the shield itself by two to three inches all around the outside. Fold over the edge to make a tube around the outside. Do not sew this with thread. Instead make small cuts with a knife to thread a leather lace through to hold the leather edge in the tubular form. This is the way the Romans did it. This rolled edge/tube is for the insertion of a cord to act as a drawstring. You may wish to cut out a few sections around the edge to allow for contraction when the drawstring is pulled tight. If you do this, make sure that you do not remove any leather which would cover the face or edge of the shield.

Seventhly, sew narrow strips of leather (you should still be using goat skin) around the shield about an inch or so in from the drawstring tube. These should be sewn on along the line of where the cover bends over the edge of the shield when the cover is on and act to reinforce the cover along the edge area which is most likely to make contact with the ground and other surfaces. After this you can also sew on any unit insignia such as a tabula ansata with you unit's name or a representation of the unit's totem animal. I would suggest doing these in a contrasting colour leather. These things can also be done with decorative stitching.

Here are some drawings by Mike Bishop:

http://s129.photobucket.com/albums/p239/...fig020.png

http://s129.photobucket.com/albums/p239/...fig050.png


Hopefully you should find this of use when you make you shield cover/tegimen.

Crispvs
Who is called \'\'Paul\'\' by no-one other than his wife, parents and brothers.  :!: <img src="{SMILIES_PATH}/icon_exclaim.gif" alt=":!:" title="Exclamation" />:!:

<a class="postlink" href="http://www.romanarmy.net">www.romanarmy.net
Reply
#5
Thanks! That helps a great amount! But do you have a source from where you got this info?
Reply
#6
I do have a good deal of information on shield covers but as most of it is unpublished at present I have had to agree not to pass it on. Therefore I can describe the basics here but cannot quote from my sources or provide references for them. Sorry if this seems frustrating.

Crispvs
Who is called \'\'Paul\'\' by no-one other than his wife, parents and brothers.  :!: <img src="{SMILIES_PATH}/icon_exclaim.gif" alt=":!:" title="Exclamation" />:!:

<a class="postlink" href="http://www.romanarmy.net">www.romanarmy.net
Reply
#7
Hiya! I'm working on the shield cover now. And was wondering. The cuts to help the contraction of the leather on the rim should they be V shaped or more U shaped?
Reply
#8
Both are okay but U-shaped are stronger as tension forces will be spread better, instead working on a single point.
________________________________________
Jvrjenivs Peregrinvs Magnvs / FEBRVARIVS
A.K.A. Jurjen Draaisma
CORBVLO and Fectio
ALA I BATAVORUM
Reply
#9
Here's my work sofar. Now doing the tube for the drawstring. Ill post a topic with the work in progress when im done. Might be interesting for some. Or humorous Smile


Attached Files Thumbnail(s)
   
Reply
#10
Looks good so far. Did you wax the boss area?
M. Demetrius Abicio
(David Wills)

Saepe veritas est dura.
Reply
#11
I've oiled it with olive oil. Because the boss leather part had a lot of stretching i already oiled it in hope it won't shrink or deform anymore. Sofar it works.
I've done the drawstring tube today and am now working on the reinforcement around the rim of the shield. After that only a tabula (lum?) And weýre done!
Reply
#12
damnnnn you're good AND fast! :twisted: Wanna do mine when I get around to it? Tongue :lol: (jk)
Samuel J.
Reply
#13
Well... i'd have to think about that! Tongue
Reply
#14
Heres my finished tegimen according to the description provided to me by Crispvs. Thanks for that!! For a complete overview of the proces look at my facebook: http://www.facebook.com/media/set/?set=a...0283270765


Attached Files Thumbnail(s)
           
Reply
#15
Great work, very nicely done!
Valete,
Titvs Statilivs Castvs - Sander Van Daele
LEG XI CPF
COH VII RAET EQ (part of LEG XI CPF)

MA in History
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  carrying straps for auxiliary oval shield Hatzi 22 4,182 10-08-2013, 09:54 PM
Last Post: Hatzi
  Roman Auxiliary shield color Eronnius 22 10,303 07-12-2012, 07:51 PM
Last Post: AMELIANVS
  Shield cover appliques Crispvs 8 2,474 07-27-2004, 09:35 PM
Last Post: Anonymous

Forum Jump: