03-29-2011, 03:42 PM
Thanks for the encouragement, Jurjen.
I have a "weed burner" that might do the same thing as the roof tar heater...but I don't plan to build a dished oval mold, and am hoping to avoid all the sanding and shaping that most of the aspis construction methods use. Using the soak/bend/dry method, I've had fair success with the traditional scuta, so it just seemed worth a try. 8mm Plywood is prone to warp on its own, so I just thought, "Hey, what if "
I'll keep a record and show how it works.
I have a "weed burner" that might do the same thing as the roof tar heater...but I don't plan to build a dished oval mold, and am hoping to avoid all the sanding and shaping that most of the aspis construction methods use. Using the soak/bend/dry method, I've had fair success with the traditional scuta, so it just seemed worth a try. 8mm Plywood is prone to warp on its own, so I just thought, "Hey, what if "
I'll keep a record and show how it works.
M. Demetrius Abicio
(David Wills)
Saepe veritas est dura.
(David Wills)
Saepe veritas est dura.