06-07-2008, 04:19 AM
What do you use for filler in the voids in the plywood? I'm asking, just because I've often used a paste of saw/sanding dust (you should have generated a good bit of that!) mixed with the same glue as what holds things together. I usually use off the shelf yellow carpenter's glue. Mix it thick, putty knife it into the holes, and it sets, not shrinking much. Sands and paints pretty well, but is not the same color, so can't be stained.
M. Demetrius Abicio
(David Wills)
Saepe veritas est dura.
(David Wills)
Saepe veritas est dura.