12-12-2008, 07:17 PM
"On the Velson sheath the upper suspension rings were iron"
Hooray - I go now to replace the top split brass rings on my Pugios with solid Iron ones! No more falling Pugios!
Many many thanks for the information!
One Pugio done:
Drilled out the rivets replaced the rings and rivets.
Took me less than 1/2 hour and used:
Dremel tool and bit
2 Steel rings
2 brass rivets
Needle nose pliers
Ball peen Hammer Claw Hammer (used as anvil)
Rivet doming tool
Hooray - I go now to replace the top split brass rings on my Pugios with solid Iron ones! No more falling Pugios!
Many many thanks for the information!
One Pugio done:
Drilled out the rivets replaced the rings and rivets.
Took me less than 1/2 hour and used:
Dremel tool and bit
2 Steel rings
2 brass rivets
Needle nose pliers
Ball peen Hammer Claw Hammer (used as anvil)
Rivet doming tool
John Kaler MSG, USA Retired
Member Legio V (Tenn, USA)
Staff Member Ludus Militus https://www.facebook.com/groups/671041919589478/
Owner Vicus and Village: https://www.facebook.com/groups/361968853851510/
Member Legio V (Tenn, USA)
Staff Member Ludus Militus https://www.facebook.com/groups/671041919589478/
Owner Vicus and Village: https://www.facebook.com/groups/361968853851510/