06-06-2008, 01:10 PM
(This post was last modified: 01-29-2018, 07:10 PM by brennivs - tony drake.)
Now to this is the start once tang is cut;
The point is next;
Mark a centre line;
The centre line is very important if you do either the apex or the leaf profile this is the part of the blade the grinder does not touch. Along the edge of the blade it might be worth drawing a line alone its length aprox 7mm in from the edge to the point as a guide I just do this by eye. again when you start grinding you do not go beyond this.
Regards Brennivs
The point is next;
Mark a centre line;
The centre line is very important if you do either the apex or the leaf profile this is the part of the blade the grinder does not touch. Along the edge of the blade it might be worth drawing a line alone its length aprox 7mm in from the edge to the point as a guide I just do this by eye. again when you start grinding you do not go beyond this.
Regards Brennivs
Woe Ye The Vanquished
Brennvs 390 BC
When you have all this why do you envy our mud huts
Caratacvs
Centvrio Princeps Brennivs COH I Dacorivm (Roma Antiqvia)
Brennvs 390 BC
When you have all this why do you envy our mud huts
Caratacvs
Centvrio Princeps Brennivs COH I Dacorivm (Roma Antiqvia)