12-16-2016, 04:34 PM
Here goes
I hope you can see how far the rivet has bent to one side
The top photo shows how flimsy the origonal fitting was, the bottom one how deformed the hole has become with the rivet bending to one side.
Here are the replacements against the one fitted.
Then finally riveted on inside and the outside I had to use a slightly bigger rivet plus the discs I kept flat so the problem would not happen again As to origonal chin strap rings, they vary in quality but seam to be of similar shape but I have to say they also suffered from good and bad fittings and riveting. Otherwise a nice little hour or so job up the Fabrica
Regards Brennivs
I hope you can see how far the rivet has bent to one side
The top photo shows how flimsy the origonal fitting was, the bottom one how deformed the hole has become with the rivet bending to one side.
Here are the replacements against the one fitted.
Then finally riveted on inside and the outside I had to use a slightly bigger rivet plus the discs I kept flat so the problem would not happen again As to origonal chin strap rings, they vary in quality but seam to be of similar shape but I have to say they also suffered from good and bad fittings and riveting. Otherwise a nice little hour or so job up the Fabrica
Regards Brennivs
Woe Ye The Vanquished
Brennvs 390 BC
When you have all this why do you envy our mud huts
Caratacvs
Centvrio Princeps Brennivs COH I Dacorivm (Roma Antiqvia)
Brennvs 390 BC
When you have all this why do you envy our mud huts
Caratacvs
Centvrio Princeps Brennivs COH I Dacorivm (Roma Antiqvia)