02-05-2009, 07:17 PM
Hello,
Next step is to made a terminal for the chape. Normally, the Mainz type have a inverted mushroom shape, sometimes very big and usually decored with vertical grooves.
Initially, i thought in do it with the lathe. Then, i have remember that i have some deepeeka apron studs, with a shape that could be used.
Then i solder it to a ring with some ridges, and the terminal is done:
You can see the deepeeka apron stud at the right side.
Next step is to made a terminal for the chape. Normally, the Mainz type have a inverted mushroom shape, sometimes very big and usually decored with vertical grooves.
Initially, i thought in do it with the lathe. Then, i have remember that i have some deepeeka apron studs, with a shape that could be used.
Then i solder it to a ring with some ridges, and the terminal is done:
You can see the deepeeka apron stud at the right side.
Cesar Pocinya
ALA AUGUSTA
https://www.facebook.com/#!/groups/115550981827499/
OFFICINA AVITIANA
https://www.facebook.com/oficinaavitiana
ALA AUGUSTA
https://www.facebook.com/#!/groups/115550981827499/
OFFICINA AVITIANA
https://www.facebook.com/oficinaavitiana