Posts: 47
Threads: 2
Joined: Jun 2008
Reputation:
0
I hope it worked (I am not sure about the photo loading on the forum)[attachment=0]IMAGE_040.jpg[/attachment]
I then stick against the inside thin board a thicker one for the outside :[attachment=1]IMAGE_044.jpg[/attachment]
FROESSEL
Posts: 47
Threads: 2
Joined: Jun 2008
Reputation:
0
I then continue untill the circle is finished.
With this method,
1) I get an already 3 cm thick aspis basis (saving 2 flat circles)
2) I have a 90° angle between the rim and the bowl and
3) The forces that might stress the shield meet different layerss of wood fibers placed in different plans (I hope it to be more resistant)
FROESSEL
Posts: 47
Threads: 2
Joined: Jun 2008
Reputation:
0
I then cover the center with inside top circles as usual.
I hope I was clear in py explanations and pictures went thru.
FROESSEL
Posts: 377
Threads: 15
Joined: Oct 2006
Reputation:
0
Very cool. That is a very good idea for reenforcing the joints on the lower rings. Those look great. Keep up the work Demetrios. The world needs more of these shields!
Yes, I am alive. I have just been lurking and reading.
"A wise man learns from his mistakes, but the truly wise man learns from the mistakes of others."
Chris Boatcallie
Posts: 47
Threads: 2
Joined: Jun 2008
Reputation:
0
Thanks.
It s a method that saves you wood, above all because the 1st two circles are very similar in dimension.
But I must admit it is a rather long method : you have to force the first thin board into the rim and stick it. The internal diameter is +/1 250 cm long.
So if you want it correctly stuck you have to put a "screw" (I dont' know the word for it) every 2 or 3 cm, and you need about 80 pieces of that kind of tool.
Then you leave it dry for a few hours.
The second part is harder : even if you had about 80 or 100 tools, you couldn't stick the whole external length beacuse after a few cm (10 or so) the wood brakes because of the material fatigue and you have to wait untill one part is dry ans has taken form and place before you continue.
I start in the center of the wooden piece to allow me to go towards both ends and do it quicker.
Nevertheless, if you stick 10 cm on both ends and this twice a day, morning and evening, you progress by max 40 cm a day and you need almost a week to finish.
That s also the reason why I started several pieces at the same time to be able to work on one piece while others are drying.
FROESSEL
Posts: 7,668
Threads: 117
Joined: Apr 2005
Reputation:
0
I like how the video makes it look like it take under 5 minutes to sand both inside and out. :lol:
Any details about getting the leather to stretch around the inside curves? Looks like a very good job all told.
M. Demetrius Abicio
(David Wills)
Saepe veritas est dura.