RomanArmyTalk
Calligae Hobnails - Printable Version

+- RomanArmyTalk (https://www.romanarmytalk.com/rat)
+-- Forum: Research Arena (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=4)
+--- Forum: Roman Military History & Archaeology (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=8)
+--- Thread: Calligae Hobnails (/showthread.php?tid=6438)



Calligae Hobnails - LUCIUS ALFENUS AVITIANUS - 08-08-2006

SALVE

Past month, i have found a lot (near 100) of hobnails inside a II century burial. I want to share with you the find.

[Image: caligaelat.jpg]

[Image: caligae.jpg]

The head are nearly semicircular, with a diameter of 1 cm. The "body" of the head have some parallel marks caused by the different leather layers. There are two, showing a leather thickness of 4 mm.

The photos i have post are probably of the point of the sole. There are soldered by the rust, and because are very near one by the other.


Re: Calligae Hobnails - Martin Moser - 08-08-2006

Hi Cesar,

thanks for sharing those. could you also measure the height of the hobnails, total, shaft, and head respectively, if possible, please?

thanks in advance!


Re: Calligae Hobnails - LUCIUS ALFENUS AVITIANUS - 08-09-2006

Your wish is my command.
8)
Shaft height: 0,8 cm
Shaft width: 0,3 cm
Head height: 0,5 cm
Head diameter: 1 cm
Total height: 1,3 cm

An image is better than 1000 wordls:

[Image: Grfico1-1.jpg]


Re: Calligae Hobnails - Flavius Promotus - 08-09-2006

Interesting, the tips of the shafts look rather riveted than clenched.


Re: Calligae Hobnails - Martin Moser - 08-09-2006

Quote:Your wish is my command.

A 100 thanks and 1 laudes for that :-) )