+- RomanArmyTalk (https://www.romanarmytalk.com/rat)
+-- Forum: Reenactment (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=5)
+--- Forum: Roman Re-Enactment & Reconstruction (https://www.romanarmytalk.com/rat/forumdisplay.php?fid=26)
+--- Thread: Need CDN source for Jeweler\'s saw and silver solder.... (/showthread.php?tid=5567)
Need CDN source for Jeweler\'s saw and silver solder.... - Magnus - 05-03-2006
Anyone know (or Matt L) where I can get a jeweler's saw and the various sized blades in Canada? Same with jeweler's silver solder.
I'm going to be getting a MAPP gas torch kit to do some high-heat joint soldering, and the jeweler's saw for some metal work.
Re: Need CDN source for Jeweler\'s saw and silver solder.... - Matt Lukes - 05-03-2006
Ask and ye shall receive Matt- absolutely I know a good source
[url:2f7qf9jm]http://www.lacywest.com/[/url] they've got everything you'll need. It's a great place right here in Vancouver actually- I get my burs there.Matt
Don\'t you have hobby shops in Canada? - Neuraleanus - 05-03-2006
That is where I usually find tools like jeweler's saw blades and the like. What are you going to make?
Re: Need CDN source for Jeweler\'s saw and silver solder.... - Emeraldweapon7d - 05-05-2006
i got what i think is a jewelers saw from a comic book store in omaha, i've never seen a "proper" jewelers saw up close so i'm not sure if it's all that good.
Re: Need CDN source for Jeweler\'s saw and silver solder.... - Martin Moser - 05-05-2006
Quote:i've never seen a "proper" jewelers saw up close so i'm not sure if it's all that good.
2nd from top is what I use and it serves me wonderfully:
http://www.zujeddeloh.de/artikel282.html
Re: Need CDN source for Jeweler\'s saw and silver solder.... - Peroni - 05-05-2006
Silver solder can be obtained at any plumbers merchants. They use it for soldering joints on half-hard and hard copper tubing.
Regards,