RomanArmyTalk

Ok, as the title says I want to build a Roman watch tower. I have some land in south-east Texas that has a lot of trees and flat ground. So I think this would be a good place to do it. What I need is any plans, dimensions, pictures and photos of any towers that have been built or dug up. Any help would be great.
Thanks,
Bryan

Quote:What I need is any plans, dimensions, pictures and photos of any towers that have been built or dug up.

I presume you're thinking of the timber watchtowers on Trajan's Column, Bryan? Like this one (courtesy of Jona's Livius website).

Or do you fancy tackling their stone-built successors, like the turrets on Hadrian's Wall? Or this free-standing example from the Upper German limes?

It's obvious that the balcony floor is supported by cantilevered joists, but which are the continuous ones, the corners, making an X under the floor, or the right angled ones, making the corner joists end at their vertex, and the floor supported by a "tic tac toe" shape?

Do these joists interlock under the deck, or are they attached at their inside ends?

I guess Robert could answer that question. It's his timber tower pictured above and below!

Unfortunately, his construction photo-diary omits the crucial stage!

Help, Robert. :!:

Now the stone one would be interesting.

the timber would be viable in Canada, unless there was a ready source of sandstone....or granite!

Does this hold a clue?

What about limestone? There is a lot of it in Texas as well as pine trees.
I had planned on building a timber watch tower. I think stone would be a little out of my price range. Who knows I might hit the lottery )

Or lime stone....

Robert will hopefully have dimensions!
My guess is the floor supports would interlink some how, but I could be
overcomplicating things....

We have lots of lime stone. I just think it would take to long to build out of lime stone.
I was looking at the one built in Holland and saw that it's 10.5m high, but how wide? I hope he dose and will share that info. It would be great if there was a set of plans for the tower.

Greats All!

I can also offer a very nifty fortress large enough for housing a centuri. It is associated with a vexillatio building the road at Alphen Praetorium Agrippinae. It is far easier to build then the tower (but you need large roofing slate, it was not done in tiles) as there is no height.

The fortress is in Romeinen in Valkenburg ISBN-10 9080853445 . Because of copyright I can't just bang a picture on RAT, but they did also send me a detailed description and a excavation floor plan. PM me you mail address.

This one is a large jpg so I'll just give the link.
http://www.ulmfamily.de/castles/P1030037.JPG

You might be able to scrounge some data from this .pdf. http://ads.ahds.ac.uk/catalogue/adsdata ... 99_519.pdf The excavation minutae might reveal some info. Probably more useful to you is the appendix which lists the dimensions of various watchtowers.

Please note the door to a watchtower is NOT at ground floor level, as in the picture of the reconstruction. It is on the first floor, with a ladder which could be pulled up and in. Then you are secure to drop things onto the nasties and there are firing slots in the ground floor wall. Have a good look at the drawing I posted.
On stone; the Romans fitted rough cut limestone into the walls with mortar and then plastered the whole thing smooth. No need to dress each stone to an even surface. The inner part of the lower supporting wall was usualy filled in with rubble and mortar (or cement), so it is just a matter of fitting blocks to in and outside and working your way up.

Dimensions of ground level are typicly 3.5 by 3.5 or 4 bij 4, but there is a lot of variation. For a good solid tower, I would recommend the 4 by 4 floorplan (outside measurement).

You could build the small fortress with breeze blocks as walls for the U shaped housing part, after the plastering no one can tell whether you used dough and wattle or breezeblocks anyway. Gate and pallisade on earthen wall are timber. The roof is timbers, the rooms are 4.4 meters by 3.8 meters, so there are no major roofing timbers needed, just enough to support the weight of the shales (or tiles if you want). Another option is using oak shingles for roofing, this is also historicly correct.

Quote:You might be able to scrounge some data from this .pdf. http://ads.ahds.ac.uk/catalogue/adsdata ... 99_519.pdf The excavation minutae might reveal some info. Probably more useful to you is the appendix which lists the dimensions of various watchtowers.

Thanks, Casmin: this is the excavation report of the watchtower at Westerton (Perthshire, Scotland).

Bryan: I can save you some labour. There's an easy-to-assemble kit for this one!! :lol:

Quote:Bryan: I can save you some labour. There's an easy-to-assemble kit for this one!! :lol:

Nice site! I'll probably purchase from them in the future. Kudos to you sir.

Here is a very nice inside view of one, which, if you look closely, should give you a lot of pointers in building one. Good luck!