04-03-2014, 04:55 PM
Key passage pages 25-26:
"Four helmets, all of the Montefortino type, were raised in 2011 (fig. 11, indicated by PW11 numbers); sections of the dome were missing on two (PW11-0010 and PW11-0031), while the other two were intact. Even though there is no standardization in their size, these four helmets exhibit a number of similar characteristics: manufacture from cast bronze that was then worked into a thin dome; a dome with a solid crest knob at its apex (missing on PW11-1101); a thickened lower rim projecting on the back side as a neck guard; a rope motif running around the lower rim and neck guard (fig. 11); and, inside the rope pattern, at least two incised lines (difficult to discern on PW11-0010) around the rim and neck guard."
http://www.journalofromanarch.com/samples/v25.Royal.pdf
"Four helmets, all of the Montefortino type, were raised in 2011 (fig. 11, indicated by PW11 numbers); sections of the dome were missing on two (PW11-0010 and PW11-0031), while the other two were intact. Even though there is no standardization in their size, these four helmets exhibit a number of similar characteristics: manufacture from cast bronze that was then worked into a thin dome; a dome with a solid crest knob at its apex (missing on PW11-1101); a thickened lower rim projecting on the back side as a neck guard; a rope motif running around the lower rim and neck guard (fig. 11); and, inside the rope pattern, at least two incised lines (difficult to discern on PW11-0010) around the rim and neck guard."
http://www.journalofromanarch.com/samples/v25.Royal.pdf
Joe Balmos